Views:3 Author:U Tech Marketing Publish Time: 2017-11-14 Origin:U Tech Marketing
The general reason of filling machine fault is the spare part is abraded. So reduce the attrition between the parts can reduce the fault rate. At prime, the filling must be experienced in a run-in period. At this moment, every part is new, so however good the processing is, it can not do the perfect lubrication, and this period is called run-in period. After being experienced in a small attrition, the machine will enter a stable attrition period. During this stable attrition period, if each part can not be lubricated totally, abnormal attrition will be occurred. And after a long time, the lift of part will be reduced largely, then the machine will have many possible hidden danger. When we use the filling machine, we must operate it according to the introduction strictly, and maintain the machine regularly. The filling machine should work in a clean, healthy and dry condition, and every part should be fastening, lubricated and antiseptic. Maintain the machine in a regular time to reduce the speed of part attrition, and to reduce the machine fault, and to prolong the machine lift.