Views:546 Author:Zhangjiagang U Tech Machine Co., Ltd. Publish Time: 2017-11-10 Origin:Site
Hi, guys, we see it again, and today we will talk about the difference of automatic water bottle filling machine and semi automatic water bottle filling machine. Are you interested in it?
As we know that automatic and semi automatic are different, they are mainly in the model of filling and capping. Our automatic water bottle filling machine are CGF Washing-filling-capping 3-in-1 unit. The machine can finish all the process such as press bottle, filling and sealing, it can reduce the materials and Outsiders touch time, improve the sanitary conditions, production capacity and economic efficiency. It is used for producing polyester bottled mineral water, purified water, alcoholic beverage machinery and other non-gas beverage machinery.
Then we mainly talk about automatic water filling machine.
5000Bottles Per Hour Mineral Water Bottling Line
water bottling machine washing part:
The rotary wheel is a fully SUS304 stainless steel welded structure. The machine applies unique overturning bottle clamp. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable. The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water. All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing. The rinser is driven by driving system positioned inside machine frame via gear transmission. Transfer Starwheel, Made of stainless steel of superior quality.Equipped with bottle jam protection device.
Automatic Water Bottle Filling Machine / Water Production Line
Rotary wheel fully made of stainless steel SUS 304. Gravity filling method. Filling valves are made of SUS316L. Filling valves are reasonably structured with accurate filling. Filling flow can reach 200ml per second. Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth. Level of cylinder is controlled with float-ball. Filler is driven through gears inside the machine frame. Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.
3 In 1 Drinking Water Filling Machine
5000BPH Complete Drinking Water Bottling Line part:
Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute. Centrifugal way of cap arranging is adopted to reduce damage of caps. A cap inspecting system is applied to control on-off of elevator.
Are you understand it? If you still have no interest in it, you can contact us, we can show you detailed data.